Frequently Asked Questions:

How do I connect my laptop to the Samsung QE75Q60B for screen mirroring?

Ensure that your Samsung QE75Q60B TV and your laptop are connected to the same Wi-Fi network or use an HDMI cable to connect directly to the TV. Press the Home button on the remote control of your Samsung QE75Q60B TV. Select Source from the menu that appears. Choose Screen Mirror from the list of available sources. Follow the on-screen prompts to complete the pairing process between your laptop and the TV. This may involve entering a PIN or selecting your laptop from a list of devices. Once your laptop is successfully connected, you should see its screen displayed on the Samsung QE75Q60B TV. Note: Some laptops may require additional software or drivers to support Screen Mirroring. Check your laptop's manufacturer documentation for more information.

How do I connect my streaming device to the Samsung QE75Q60B TV using HDMI?

To connect your streaming device to the Samsung QE75Q60B TV using HDMI, follow these steps:
1. Locate an available HDMI port on both the streaming device and the TV. The back panel of the TV has multiple HDMI ports labeled as IN 1 through IN 4 (see image below). Choose a port that is not currently in use to ensure a stable connection. Connect one end of an HDMI cable into the streaming device's output port (usually labeled "HDMI OUT" or "TV OUT"). Insert the other end of the same HDMI cable into the chosen HDMI input on the TV's back panel. Turn on your streaming device and then switch to the correct HDMI input using the TV's source selection button, usually labeled as the "SOURCE" or "INPUT" button on the remote control. Adjust the TV settings to match the resolution of your streaming device. This can be done through the TV's menu system by selecting "Picture Options" or "Image Settings". Choose the appropriate input source and set the resolution to "Auto" or "1080p" (or higher, if available). Adjust any additional settings you wish to apply, such as sound output, closed captioning, or display preferences. These can usually be found in the TV's menu system under the "System Settings" or "General" tab. Once connected and configured, enjoy streaming your favorite content on the Samsung QE75Q60B TV! If you have any further questions regarding setup or operation, consult the user manual provided with your device or contact Samsung support for assistance.

Why does my Samsung QE75Q60B TV display a "No Signal" message on some HDMI ports, but not others?

That's frustrating! The "No Signal" message on your Samsung QE75Q60B TV can be caused by several reasons related to the HDMI ports themselves or the devices connected to them. Let's go through some possible causes:

1. Faulty HDMI Port**: It's possible that one or more of the HDMI ports on your TV are damaged or faulty, causing the "No Signal" issue. Try swapping cables between different ports and see if the problem persists. HDMI CEC (Consumer Electronics Control) Issues**: If you have devices with CEC enabled (like soundbars or gaming consoles), it can sometimes cause signal loss or interference on certain HDMI ports. Try disabling CEC on the affected device(s). Cable Quality or Connection Issues**: Low-quality cables, loose connections, or damaged connectors can also lead to signal loss. Inspect your cables and ensure they're securely connected to both the TV and the source device. EDID (Extended Display Identification Data) Mismatch**: EDID is a protocol that helps devices negotiate display settings. Sometimes, an EDID mismatch between the TV and the source device can cause issues with certain HDMI ports. Try resetting the EDID on your TV by going to Settings > Support > Self Diagnosis > Reset TV. HDMI Version Compatibility**: If you're using a newer device (e. K or HDR-capable) with an older TV, it might not be compatible with all HDMI ports. Make sure the source device is connected to an HDMI port that matches its capabilities (e. HDMI 2. K devices). Power Cycle**: Sometimes, simply turning off and on both the TV and the source device can resolve connectivity issues. TV Firmware or Driver Issues**: Outdated firmware or driver issues might be causing problems with specific HDMI ports. Check your TV's software version and update it to the latest available if necessary. To troubleshoot further:

1. Try using a different cable for the affected port. Swap the source device between different ports (if possible). Test the HDMI port on another device (e. Blu-ray player). If none of these steps resolve the issue, it's possible that there might be a more complex problem with your TV or its internal circuitry. You may want to contact Samsung support for further assistance or consider visiting an authorized service center.

What are the features of Samsung QE75Q60B?

Modern TVs have long ceased to be used only for watching TV.Currently, we can also play our own movies, play games with them and even browse the internet. This tv has few connection possibilities: Digital Optical Out, Ethernet (RJ45), HDMI, USB. Do you need something with digital optical out? Here you can find other devices with digital optical out. Samsung QE75Q60B has time-shift, usb-recording (pvr), voice control. You can find more information on devices with voice control here.

Can I control my Samsung QE75Q60B with my voice?

Yes, you can control this TV with your voice. You can control it by: Bixby, Google Assistant. For more information on voice control, check out this article on Alexa and what it can do.

How to setup Samsung QE75Q60B - practical tips

For Samsung QE75Q60B screen calibration and color temperature setup - click here