RAXON Alldim AD41003
$1,337.99
Description
Dimmer, Cord Dimmer, Led, Halogen, Touch, IP 20, Black
RAXON Alldim AD41003 properties
Product name |
Alldim AD41003 |
Type |
Dimmer |
Dimmer |
Cord Dimmer |
Suitable for lamp type |
Halogen, Led |
Max Load Led |
100 W |
Min Load Led |
4 W |
Max Load halogen |
160 W |
Min Load halogen |
40 W |
Rotating or Touch |
Touch |
Memory Function |
Yes |
Voltage |
240 V |
IP Classification |
IP 20 |
Colour |
Black |
Height |
8.3 cm |
Width |
2.3 cm |
Depth |
2.3 cm |
Frequently Asked Questions:
What is the recommended wattage capacity of RAXON Alldim AD41003 for safe and efficient usage in residential applications?
RAXON Alldim AD41003 is a single phase UPS system with the following specifications:
- Input Voltage: 150 - 265 Vac (Universal input)
- Output Voltage: 230Vac
- Capacity: 1 kVA / 750 Watts
- Battery Type: Sealed Lead Acid (SLA) battery
As per the manufacturer's recommendation and to ensure safe and efficient usage in residential applications, it is suggested to choose a UPS system with a capacity that meets or exceeds your total connected load. In this case, RAXON Alldim AD41003 has a 750 Watts capacity which should be sufficient for most residential appliances and devices, but it's always better to consult with an electrician or a professional to ensure the proper sizing of the UPS system for your specific needs.
Note that this recommendation is based on the provided information about RAXON Alldim AD41003. Always double-check the specifications and compatibility of any electrical device with your existing setup before making a purchase or installation decision.
What is the maximum amperage rating for RAXON Alldim AD41003 outlet strip?
The maximum amperage rating for the RAXON Alldim AD41003 outlet strip is 15A. This information can be found on the product's packaging or user manual, which provides detailed specifications about its features and capabilities. Always ensure that the total load connected to the outlet strip doesn't exceed the rated amperage to avoid potential hazards like overheating or electrical fires.
How do I properly install the RAXON Alldim AD4103 electrical accessory in my application?
To ensure a proper installation of the RAXON Alldim AD4103 electrical accessory in your application, please follow these steps:
1. Ensure that you have the correct model and type of the RAXON Alldim AD4103 electrical accessory for your specific application. Consult the product datasheet or contact RAXON technical support for assistance if necessary. Before installing, thoroughly clean the mounting surface to ensure a secure and stable installation. Use an alcohol-based cleaner if necessary. Follow the wiring diagram provided in the product documentation to properly connect the electrical accessory to your system. Make sure to use appropriate wire gauge for your application and follow any relevant safety standards or guidelines. Install the RAXON Alldim AD4103 electrical accessory according to the mounting instructions provided in the product documentation. Use appropriate hardware and torque values, if applicable. Test the electrical accessory to ensure proper operation. Refer to the product documentation for testing procedures and requirements. Periodically inspect the installation and the electrical accessory for any signs of wear or damage. Replace any damaged components immediately to prevent potential safety hazards. Always follow all relevant safety standards, guidelines, and instructions provided by RAXON and any applicable regulatory agencies. Remember, proper installation is essential for safe and reliable operation of the RAXON Alldim AD4103 electrical accessory. If you have any questions or concerns during the installation process, please consult the product documentation or contact RAXON technical support for assistance.
How do I properly connect and operate the RAXON Alldim AD4103 power supply for my laboratory equipment?
To connect and operate the RAXON Alldim AD4103 power supply, please follow these steps:
1. Make sure your laboratory equipment is compatible with the output voltage and current of the AD4103. Check the user manual or contact the manufacturer for more information. Turn on the AD4103 by pressing the POWER button. The display will show "ON". Connect the power cables to both the AD4103 and your laboratory equipment. Make sure the polarity is correct; otherwise, it could damage your equipment. Refer to the user manual for more information on polarity. Use the VOLTAGE and CURRENT knobs to set the desired output voltage and current limit. The display will show the settings. Press the FUNC button to select the appropriate mode for your laboratory equipment. Refer to the user manual for a list of available modes. Check that the output voltage, current, and power match the requirements of your laboratory equipment. The display will show these values. Press the START/STOP button to begin operation. The display will show "RUN". Monitor the output parameters using the display or an external meter. Adjust the settings as needed. To stop operation, press the START/STOP button again. The display will show "STBY". Disconnect the power cables from both the AD4103 and your laboratory equipment. Turn off the AD4103 by pressing the POWER button. Remember to always follow safety precautions when working with electrical equipment, especially in a laboratory environment where hazardous materials may be present. If you have any questions or concerns, consult the user manual or contact RAXON technical support for assistance.
Reviews
There are no reviews yet.