Description
Power Cable, No, Device Cable, Black
Goobay 97344 0.75m properties
| Product name | 97344 0.75m |
| Type | Power Cable |
| Grounded | No |
| Cable Length | 0.75 m |
| Area of Use (Cable) | Device Cable |
| Colour | Black |
Frequently Asked Questions:
How do I connect my Goobaay 97344 0.75m to a power source for installation and use?
To connect the Goobaay 97344 0. Ensure that the Goobaay 97344 0. Locate the power cable with a USB connector on one end and a wall plug on the other end. This cable should have been provided in the package when you purchased the Goobaay 97344 0. Connect the USB connector of the power cable to the USB charging port located at the side or bottom of the Goobaay 97344 0. Make sure that it is connected properly and securely. Plug the wall plug end of the power cable into a working electrical socket. Ensure that the socket is in good condition and is capable of providing the required voltage and amperage for the Goobaay 97344 0. Once connected, switch on the Goobaay 97344 0. The LED indicators should light up to indicate that it is powered on and connected to a power source. Your Goobaay 97344 0.
How do I properly install a light switch in my home using Goobay 97344 0.75m electrical accessories?
To install a light switch using Goobay 97344 0. Turn off the power supply to the circuit you will be working on at the main electrical panel. Use a voltage tester to confirm that there is no electricity flowing to the wires. Remove the old switch cover plate and unscrew the old light switch from the wall box. Carefully disconnect the wires from the old switch, making note of which wire goes where (usually black to black, white to white, and green or bare copper to green or bare copper). Mount the new Goobay switch into the wall box using the provided screws and mounting plate. Make sure it is level and securely fastened. Connect the wires from the electrical box to the corresponding terminals on the new switch, following the color-coding guidelines (black to black, white to white, green or bare copper to green or bare copper). Use wire nuts to secure each connection. Attach the cover plate over the new switch and screw it into place. Turn the power back on at the main electrical panel and test the light switch to make sure it is functioning properly. Remember to always follow proper safety guidelines when working with electricity, including using a voltage tester and turning off the power supply before starting any work. By following these steps, you should be able to successfully install your new Goobay light switch.
Jorge Peterson –
I recently purchased the Goobay 97344 0.75m rated at 2 Electrical Device Cable for my work as a janitor in Nashville. The first thing that struck me was its black colour, which I found to be quite sleek and professional looking. However, my initial impressions changed when I started using it.
The cable is advertised as being suitable for use with a range of electronic devices, but I found that it did not fit properly into some of the sockets I tried to use it with. This was frustrating as I had bought it primarily for use with my vacuum cleaner, but ended up having to use an older cable that I already had.
When comparing it to other known electrical accessories, I was disappointed by the lack of flexibility in the cable, which made it difficult to manoeuvre around tight spaces. In contrast, some of the other cables I have used in the past have been much more user-friendly.
In terms of delivery, I was pleased that the cable arrived in Nashville quickly and with no issues. However, given the problems I have encountered with using it, I don’t think that I would recommend purchasing the Goobay 97344 0.75m rated at 2 Electrical Device Cable. There are other, better options out there.