Byron 7900


SKU: 9992242 Category: Tags: , , ,


Doorbell, Push Button, Black

Byron 7900 properties

Product name7900
DorbellPush Button
Height5.5 cm
Width2.5 cm
Depth1.9 cm
Weight13.6 g

Additional information

Product name

Product type








There are no reviews yet.

Be the first to review “Byron 7900”

Your email address will not be published. Required fields are marked *

Frequently Asked Questions:

How do I properly install a GFCI outlet in my home using Byron 7900 components?

Turn off power to the circuit: Before starting, make sure to turn off power to the circuit at the main electrical panel. You can do this by flipping the corresponding breaker switch to the "off" position. Remove the existing outlet: Using a screwdriver, remove the cover plate from the current outlet and unscrew the mounting screws that hold it in place. Carefully disconnect the wires from the terminals on the back of the old outlet. Install the Byron 7900 GFCI Outlet: Insert the new Byron 7900 GFCI outlet into the electrical box, making sure that the wiring configuration matches the one you removed from the previous outlet. Connect the white (neutral) wire to the silver screw terminal on the left-hand side of the outlet, and connect the black (hot) wire to the gold screw terminal on the right-hand side of the outlet. The green or bare grounding wire should be connected to the green or bare grounding screw on the bottom left-hand side of the outlet. Install the cover plate: Securely fasten the cover plate over the new GFCI outlet, and tighten the mounting screws into place. Test the new GFCI outlet: Turn the power back on at the main electrical panel, and test the GFCI outlet by plugging in a small appliance such as a lamp or a radio. Press the "test" button located on the front of the GFCI outlet to ensure that it has properly tripped. If you're not sure how to use a GFCI outlet, refer to the instruction manual that came with your Byron 7900 components for more information. Label the circuit: Finally, label the circuit with a sticker or some other form of identification so you can easily remember which circuit it is and what type of outlet is installed there. This will help prevent any confusion in the future when working on electrical projects around your home.

How do I properly install a new light switch in my home using a Byron 7900 series switch?

Gather necessary tools and materials:
- Byron 7900 series light switch
- Screwdriver (flathead or Phillips, depending on the screws provided with your switch)
- Wire connectors (if needed, depending on the wiring configuration in your electrical box)
- Voltage tester (optional but recommended to ensure there is no power to the electrical box before beginning)
2. Turn off power:
If possible, locate the circuit breaker that controls the electricity flowing to the light switch you'll be replacing and flip it to the "off" position. This will ensure that there is no electrical current running through the wiring in the electrical box during installation. If you don't have a circuit breaker nearby or can't locate it, use a voltage tester to confirm that there is no power before proceeding. Remove the old switch:
- Carefully remove the cover plate from the old switch using a screwdriver. Unscrew the two mounting screws holding the switch in place and gently pull the switch out of the electrical box. If you encounter resistance while removing the switch, it may be held in place by wire connectors instead of screws. Carefully detach any wire connectors using a pair of pliers before proceeding. Install the Byron 7900 series switch:
- Position the new switch into the electrical box so that the wiring connections are aligned with the corresponding terminals on the switch. Secure the switch in place by tightening the two mounting screws using a screwdriver. Connect the wiring:
- The Byron 7900 series switch has three terminals: black (hot), white (neutral), and green (ground). Connect each wire from your electrical box to the appropriate terminal on the switch, following these guidelines:
- If your electrical box has two wires connected to it:
- Connect the black or red wire to the black (hot) terminal. Connect the white wire to the white (neutral) terminal. If necessary, use wire connectors to secure the connections between the wires and terminals. If your electrical box has three wires connected to it:
- Connect the black or red wire to the black (hot) terminal. Connect the white wire to the white (neutral) terminal. Connect the green or bare copper wire to the green (ground) terminal. Tighten each connection securely using a screwdriver, but be careful not to overtighten and strip the wire insulation. Attach the cover plate:
- Slide the new cover plate onto the switch, making sure it's flush with the wall. Secure the cover plate in place by tightening the two mounting screws using a screwdriver. Restore power:
- If you turned off the circuit breaker or removed the electrical box cover to test for voltage, turn the circuit back on and replace the cover if necessary. Test the new switch:
- Turn on the light at the switch to confirm that it's functioning properly. Finish up:
- Clean up any debris or tools left over from the installation process. Label the circuit breaker, if applicable, so you can easily identify it in case you need to turn off power again in the future.

"How do I properly install a wall outlet in my home using a Byron 7900 device?"

First, make sure to turn off power to the circuit you will be working on at the circuit breaker. This is important for safety reasons as electrical current can be dangerous. Remove the old wall outlet by gently pulling it out of the wall. If it's difficult to remove, try wiggling it back and forth or using a screwdriver to pry it loose. Inspect the wiring behind the outlet. You should see two black wires, one white wire (which is connected to a silver terminal), and one green or bare copper wire (which is connected to the green grounding screw). If you're not sure which wire is which, consult a wiring diagram for your specific outlet. Connect the Byron 7900 device to the black wires using the screw terminals provided. Make sure to securely tighten the screws to ensure a strong connection. Next, attach the grounding wire from the outlet to the green grounding screw on the Byron 7900 device. Again, make sure to tightly secure the screw in place. Place the new wall outlet into the electrical box and secure it with screws. Make sure that the screws are tight enough so that the outlet is flush against the wall but not so tight as to strip the threads on the electrical box. Connect the white wire from your home's wiring to the silver terminal on the new wall outlet. If your home doesn't have a white wire, connect the black wires directly to the Byron 7900 device and leave the white wire disconnected. Finally, push the new outlet into the wall box until it's flush against the wall. Secure it in place with screws or plastic clips, depending on your outlet. Turn the power back on at the circuit breaker and test your newly installed Byron 7900 device by plugging in a lamp or other device.