Swann SWADS-WVDP720-UK
$15.99
Description
Doorbell, Video Dorbell, Black, Wifi, Speaker, Microphone, Night Vision, Motion Sensor
Swann SWADS-WVDP720-UK properties
| Product name | SWADS-WVDP720-UK |
| Type | Doorbell |
| Dorbell | Video Dorbell |
| Colour | Black |
| Video Format | 720p |
| Features Doorbell | Microphone, Motion Sensor, Night Vision, Speaker, Wifi |
| Height | 14.4 cm |
| Width | 7.0 cm |
| Depth | 3.9 cm |
| Weight | 242.0 g |
Frequently Asked Questions:
"How do I connect the Swann SWADS-WVDP720-UK wireless door chime to my existing doorbell wiring?"
First, turn off power to your existing doorbell by switching off the circuit breaker or removing the fuse that controls it. Open the cover plate of your existing doorbell transformer and disconnect the wires. You may need a screwdriver or wire cutters to do this. Connect the two black wires from the Swann SWADS-WVDP720-UK wireless door chime to the corresponding wires on the transformer. Make sure you connect the correct wires, as mixing them up could cause electrical problems. Connect the two white wires from the Swann SWADS-WVDP720-UK wireless door chime to the corresponding wires on the transformer. Again, make sure you connect the correct wires. Close the cover plate of the transformer and turn the power back on by switching on the circuit breaker or replacing the fuse. Follow the instructions provided with your Swann SWADS-WVDP720-UK wireless door chime to complete the setup process. This may include pairing the door chime with its corresponding receiver and adjusting settings. Test the doorbell by pressing it or opening the front door. You should hear a chime from both the Swann SWADS-WVDP720-UK wireless door chime and your existing doorbell. If you only hear a chime from one device, check that the wiring is connected correctly. Adjust the volume of the Swann SWADS-WVDP720-UK wireless door chime using the controls on its base station or receiver unit. This will allow you to balance the sound levels between both devices if needed.
How do I connect my Swann SWADS-WVDP720-UK device to Wi-Fi for remote viewing and control?
To connect your Swann SWADS-WVDP720-UK device to Wi-Fi for remote viewing and control, please follow these steps:
1. Ensure that your Wi-Fi network is active and within range of the camera's location. Press and hold the WPS button on your router for 5 seconds until the LED light on the front of the router begins flashing rapidly. Within 2 minutes, press and hold the WPS button on the back of the camera until both LED lights stop blinking and become solid. This indicates a successful connection. If you do not have a WPS-enabled router, connect the camera to your computer using an Ethernet cable and log in to its web interface. Navigate to the "Network" tab and select the Wi-Fi network you wish to join. Enter the password (if required) and click "Save". To access your camera's live feed remotely, download the Swann Security app on your smartphone or tablet and sign in with your Swann account details. Alternatively, visit the Swann website and log in to your account to view the cameras from a web browser. From here, you can control your camera's settings, receive notifications, and view footage from multiple cameras simultaneously.
How do I properly install and configure the Swann SWADS-WVDP720-UK wireless doorbell system in my home, step by step?
Unpacking the Package:
After receiving your Swann SWADS-WVDP720-UK wireless doorbell kit, unpack all the components from the package. The package should include a base station, two wireless door chimes, battery-operated push buttons, and screws for installation. Choosing an Ideal Location:
The base station needs to be placed near your home's electrical supply. Also, ensure that there is a clear line of sight between the push buttons and the base station. It is recommended to install the push buttons outside your door or gates. The wireless door chimes can be installed at any convenient location within the house where you want to hear the doorbell ring. Mounting the Base Station:
Use the screws provided to attach the base station to a wall or ceiling near an electrical outlet. Ensure that the base station is level and securely attached. Connecting the Base Station to Power:
Connect the base station's power supply to the electrical outlet. The LED light on the front of the base station will turn green, indicating that it is powered on. Adding Batteries to Push Buttons:
Install fresh batteries into each push button following the manufacturer's instructions provided in the packaging. Ensure that you handle the batteries with care and avoid contact between the negative and positive terminals. Installing Push Buttons:
Attach each push button using screws or adhesive pads, depending on your preference. If you prefer screws, drill pilot holes first to ensure a secure fit. Ensure that the push buttons are level and firmly attached. Registering the Push Buttons with Base Station:
Press and hold the button on each push button for 5 seconds until the LED light flashes green three times. Repeat this process for all push buttons you want to register. This step is essential as it establishes a wireless connection between the push buttons and the base station. Adding Wireless Door Chimes:
Choose a convenient location to install each door chime, such as a bedroom or living room. Use screws provided to attach the door chimes to a wall or ceiling. Connect the power supply to each door chime's electrical outlet. Registering Door Chimes with Base Station:
Press and hold the "A" button on one of the wireless door chimes for five seconds until the LED light flashes green three times. Repeat this process for all the remaining door chimes you want to register. This step establishes a wireless connection between the door chimes and the base station. Testing the Doorbell System:
Press any of the registered push buttons to test your Swann SWADS-WVDP720-UK wireless doorbell system. If everything is working correctly, you should hear the doorbell ring through all the registered wireless door chimes. Adjusting Volume Settings:
Each wireless door chime has an adjustable volume control. Use the volume control knob on each door chime to adjust the volume according to your preference. Upgrading the System:
The Swann SWADS-WVDP720-UK wireless doorbell system supports up to four push buttons and eight door chimes. If you need to add more devices, you can purchase additional components separately and follow the same installation process mentioned above. In conclusion, by following these detailed steps, you should be able to install and configure your Swann SWADS-WVDP720-UK wireless doorbell system efficiently. Remember always to handle the batteries with care, attach all devices securely, and test everything before use.
Ruth Barker –
I recently purchased the Swann SWADS-WVDP720-UK electrical accessory and have been using it for the past month. As an architect, I was drawn to its sleek design and the fact that it is only 7.0 cm in width, which means it doesn’t take up too much space on my desk.
The Swann SWADS-WVDP720-UK records in 720p video format, which is decent enough for my needs. However, I’ve seen other electrical accessories that offer better video quality in the same price range. While it gets the job done, it doesn’t quite measure up to some of the other options out there.
One thing I did appreciate was the ease of delivery. Even though I live in St. Paul, the device arrived quickly and in good condition.
In summary, I would give this electrical accessory a rating of 3 out of 5. While it does have some redeeming qualities, it falls short in some areas that are important to me. If you’re on a budget and don’t need top-of-the-line video quality, it’s worth considering. However, if you’re looking for the best of the best, you might want to look elsewhere.
Ryder Willis –
Hi, my name is Ryder Willis and I live in Cairns, Australia. You know how annoying it can be when you’re trying to install electrical accessories like cameras or floodlights but you don’t have the right equipment? Well, I had that problem too! But then I discovered Swann SWADS-WVDP720-UK and everything changed!
One common issue with electrical accessories is that they can be really difficult to set up if you don’t know what you’re doing. With Swann SWADS-WVDP720-UK, though, it was super easy – even for someone like me who isn’t very good with technical stuff! The instructions were clear and the whole process only took a few minutes.
Another great thing about Swann SWADS-WVDP720-UK is that it’s really eco-friendly. It uses less energy than other similar products, which means I can help save the environment while also keeping my home safe! Plus, since it helps me save money on my electricity bill, I can also save some extra cash for things like going on vacation or buying new gadgets.
But what really makes Swann SWADS-WVDP720-UK so amazing is its super cool technology. It has a built-in smart motion sensor that activates the lights only when there’s movement in my yard, which means I don’t waste energy when it’s not needed. And did you know that Swann SWADS-WVDP720-UK can also send alerts to my phone if something strange happens? That way, I can keep an eye on my property even when I’m far away!
So if you’re looking for a simple and eco-friendly solution to your security needs, look no further than Swann SWADS-WVDP720-UK. Trust me, it’s the best thing since sliced bread!