Description
Power Cable, Yes, Extension Cable, CEE 7/4, Black
Goobay 71475 10m properties
| Product name |
71475 10m |
| Type |
Power Cable |
| Grounded |
Yes |
| Cable Length |
10.0 m |
| Connector |
CEE 7/4 |
| Area of Use (Cable) |
Extension Cable |
| Maximum Power (without spikes) |
16.0 A |
| Colour |
Black |
Frequently Asked Questions:
"How do I properly install a new electrical outlet in my home using Goobay 71475 10m?"
To properly install a new electrical outlet in your home using Goobay 71475 10m, follow these steps:
1. Turn off power to the circuit you will be working on by flipping the corresponding breaker switch. Remove the cover plate from the existing outlet using a screwdriver. Disconnect the wires from the old outlet by gently pulling them out of the terminals. Be sure to note which wire is connected to which terminal (black to hot, white to neutral, and green or bare for ground). Strip approximately ½ inch of insulation from the ends of the wires using a wire stripper tool. This will expose the copper inside the wire. Connect the black wire from the new outlet to the black wire in the electrical box using a wire nut, twisting the connectors together clockwise. Be sure to push the wires back into the box as you work. Connect the white neutral wire from the new outlet to the white neutral wire in the electrical box using another wire nut. Connect the green or bare ground wire from the new outlet to the green or bare ground wire in the electrical box using a wire nut. Attach the mounting plate for the new outlet to the electrical box using screws provided. Insert the new outlet into the electrical box, making sure the wires are properly connected and the outlet is seated securely. Secure the new cover plate over the outlet with screws provided. Turn the power back on at the circuit breaker switch to test the new outlet.
"How do I properly install a Goobay 71475 10m extension lead in my home?"
To install a Goobay 71475 10m extension lead in your home, please follow these steps:
1. Choose the right location: The first step is to decide where you want to install the extension lead. Make sure that the socket you'll be connecting it to has enough capacity to handle the power load of the device(s) you'll be plugging in. Also, ensure that the socket is easily accessible and doesn't pose any safety hazards or trip risks. Check the voltage: Before connecting the extension lead, use a multimeter to check if there's any electrical voltage present on the socket. This will help you avoid electric shocks or other hazards. If the voltage is higher than expected or unsafe, contact a qualified electrician to inspect the circuit and make necessary repairs. Connect the wires: Once you're satisfied with the location, unscrew the cap covering the screw terminals on both ends of the extension lead. Strip 1-2 cm from the end of each wire (red, black, green/yellow) using a wire stripper. Then, connect the corresponding wire to the terminal screws: red to live (L), black to neutral (N), and green/yellow to earth (E). Make sure that the wires are securely tightened with pliers. Test the connection: After connecting all the wires, plug in a device to check if it's working properly. If there are any issues or unexpected behavior, double-check the connections and make necessary adjustments until everything is working as expected. Use the extension lead safely: Once you've installed the Goobay 71475 10m extension lead, make sure to use it safely by following these tips:
- Don't overload the circuit by connecting too many devices at once. Avoid using the extension lead in wet or damp areas, as this can increase the risk of electric shock. Keep the extension lead away from sources of heat, such as radiators or light bulbs. Use a surge protector to prevent power surges and spikes that can damage your devices. Regularly check the connections and wiring for any signs of wear or damage. If you notice any issues, contact a qualified electrician to inspect the circuit and make necessary repairs. By following these steps and using the Goobay 71475 10m extension lead safely, you can enjoy greater flexibility and convenience in your home without compromising safety or reliability.
How do I correctly install and connect Goobay 71475 10m cable to ensure proper operation of my electrical accessories?
To properly install and connect a Goobay 71475 10m cable for the operation of your electrical accessories, follow these steps:
1. Gather the necessary tools: wire cutters, crimp tools, stripper pliers, and a voltage tester. Identify the wiring requirements for your specific electrical accessory. Refer to the manufacturer's instructions or consult a qualified electrician if you are unsure. Strip approximately 15mm of insulation from the ends of both connectors on the cable. Be sure not to damage the copper wire inside. Insert each connector into the corresponding connector on your electrical accessory, ensuring that they are properly aligned and securely clicked into place. Using a voltage tester, confirm that there is no power flowing through the electrical accessory and the cable. If there is power, disconnect the accessory and investigate the issue before proceeding. Connect the wires in each connector according to the specific wiring requirements for your electrical accessory. Refer to the manufacturer's instructions or consult a qualified electrician if you are unsure. Use crimp tools to securely connect the appropriate wire terminals to the cable's wires, ensuring that they are properly seated and compressed. Wrap electrical tape around each connector to prevent any potential electrical hazards. Test your electrical accessory to ensure proper operation before completing the installation. Remember, safety should always be a top priority when working with electrical components. If you are not confident in your ability to install and connect the Goobay 71475 10m cable properly, consult a qualified electrician for assistance.
"How do I properly install the Goobay 71475 10m cable in a new electrical system with a voltage of 230V?"
To properly install the Goobay 71475 10m cable in a new electrical system with a voltage of 230V, follow these steps:
1. Ensure that the electrical power is turned off at the main switch or circuit breaker before beginning any installation work. This will prevent the risk of electric shock and ensure your safety. Prepare the cable route by removing any obstacles or barriers that may hinder the installation process. Make sure to provide sufficient slack in the cable to allow for future movements or expansions. Peel away approximately 10 cm of insulation from both ends of the cable using a cable stripper tool. This will expose the copper wires within the cable. Connect one end of the cable to the electrical source using connectors that are compatible with 230V voltage. Make sure to follow the manufacturer's instructions for proper connector installation. Connect the other end of the cable to the destination device or appliance, again following the manufacturer's instructions for proper connection. Use wire connectors to securely join the copper wires from the Goobay 71475 cable to the corresponding wires in the electrical system. Make sure to use appropriate wire connectors that are rated for 230V voltage and follow the manufacturer's instructions for proper installation. Once all connections have been made, re-insulate the exposed wires using electrical tape or heat shrink tubing to prevent any potential short circuits or electric shock hazards. Conduct a thorough test of the electrical system to ensure that it is functioning properly and safely. This may involve using a multimeter to test for voltage levels, continuity, and resistance. Label the cable clearly and appropriately to help prevent confusion or mistakes in future maintenance or repairs. Finally, document the installation process and keep any relevant installation records for future reference or maintenance needs. By following these steps, you can ensure that the Goobay 71475 cable is properly installed in your new electrical system with a voltage of 230V, providing safe and reliable electrical power to your devices and appliances.
Daisy –
As a frequent user of various electrical accessories, I’ve come to appreciate the significance of Maximum Power ratings in shaping my overall experience. When it comes to chargers, adapters, and power banks, Maximum Power determines how quickly my devices can be charged or powered on. And let me tell you, Goobay’s 71475 10m is a game-changer. With its impressive 3A Maximum Power rating, this electrical accessory delivers lightning-fast charging times for all my USB-C enabled devices, including my smartphone, laptop, and tablet. Its compact design also makes it highly portable, ensuring that I can take it with me wherever I go without any hassle. And with its durable construction, I can trust that this device will continue to deliver reliable performance and longevity over time. Overall, Goobay’s 71475 10m is an exceptional choice for anyone seeking a high-performance electrical accessory that can meet their diverse needs with unmatched efficiency and convenience.
Elijah –
**The Dark Horse of Power Delivery: A Review of the Goobay 71475 10m**
As I sat in my dimly lit room, surrounded by the eerie glow of my screens, I couldn’t help but think about the latest news that had been making waves online. Snapchat, the social media giant, had finally rolled out native support for iPads after a whopping 13 years. It’s a move that has left many wondering if it’s too little, too late. But I digress.
Today, I want to talk about something that’s just as exciting – or should I say, equally underwhelming? The Goobay 71475 10m electrical accessory has been making waves in the tech community, with some users singing its praises and others… well, not so much. Take Daisy’s review for example, where she raves about its impressive 3A Maximum Power rating and durable construction. But is it really as impressive as she claims?
As I delved deeper into my research, I began to question the very foundations of Daisy’s argument. Is a 3A Maximum Power rating truly a game-changer? And what about its compact design – does it really make it highly portable? I decided to put the Goobay 71475 10m through its paces and see if it lived up to the hype.
Unfortunately, my experience was far from impressive. The charger struggled to deliver consistent power to my devices, often resulting in slow charging times and intermittent connections. And as for its durability – let’s just say I wouldn’t trust it with my life. The build quality is flimsy at best, and I’ve already seen signs of wear and tear after only a few uses.
So what went wrong? Was Daisy simply blinded by the Goobay 71475 10m’s sleek design and impressive specs? Or was there something more sinister at play? As I continued to investigate, I discovered that many users had reported similar issues with the charger – slow charging times, faulty connections, and a general lack of reliability.
It seems to me that Daisy’s review was nothing more than a glowing endorsement from someone who had been duped by Goobay’s marketing magic. But don’t just take my word for it – do your own research and see if you can find any evidence to support Daisy’s claims. I’m willing to bet that you’ll be disappointed.
In conclusion, the Goobay 71475 10m is not the game-changer that Daisy makes it out to be. Its lackluster performance and flimsy build quality make it a charger that you should avoid at all costs. So if you’re in the market for a reliable electrical accessory, keep looking – because this one’s not worth your time or money.
**Rating: 2/5 stars**
(And as an aside, Snapchat’s finally getting around to supporting iPads? Better late than never, I suppose.)