Byron 7730


SKU: 10082544 Category: Tags: , , ,


Doorbell, Push Button, White

Byron 7730 properties

Product name7730
DorbellPush Button
Lighting in Push ButtonYes

Additional information

Product name

Product type



Lighting in Push Button


There are no reviews yet.

Be the first to review “Byron 7730”

Your email address will not be published. Required fields are marked *

Frequently Asked Questions:

How do I program my Byron 7730 garage door opener?

To program your Byron 7730 garage door opener, follow these steps:
1. Close the garage door and wait for it to completely stop moving.
2. Locate the "Learn" button on the back of the garage door opener motor. The Learn button is usually a small black or red button with a symbol that looks like an arrow in a square.
3. Press and hold the Learn button until the light on the motor starts to flash quickly. This may take 10-20 seconds.
4. While the light on the motor is still flashing, press and release the garage door remote control's "Learn" or "Program" button within 30 seconds. The motor's light will now flash slowly.
5. Release the Learn button on the opener motor.
6. Test your remote control by opening and closing the garage door to make sure it is working properly.

"How do I properly install a GX16A electrical connector on a cable with a diameter of 8 mm?"

To correctly install a GX16A electrical connector onto an 8mm diameter cable, you will need to follow these steps:

1. Strip the cable ends: Use a cable stripper tool to remove approximately 25mm (1 inch) of insulation from each end of the cable. The exposed copper conductor should be clean and free of any burrs or frayed ends. Insert the cable into the connector: With the connector's keyway facing up, insert the stripped cable ends into the connector. Make sure that the cable is correctly oriented with the connector's keyway aligned with the copper conductor's ribbon structure. Push the cable all the way into the connector until it stops. Insert and tighten the locking ring: Take the locking ring and insert it onto the connector's backshell, making sure that it sits flush against the connector. Gently push the locking ring downwards to engage it with the connector's locking mechanism. Pull the cable gently to check if it is securely attached. Test for connectivity: Using a multimeter or network tester, test the connectivity of the connector to ensure that it has been installed correctly. If there are any issues, double-check that the cable is inserted correctly into the connector and that the locking ring is securely engaged. Label the connector: Once the connection has been tested and confirmed, label both ends of the connector for identification purposes. This can help prevent confusion when connecting multiple devices together using GX16A connectors. By following these steps, you should be able to install a GX16A electrical connector onto an 8mm diameter cable correctly and with confidence. Remember that proper installation is crucial for ensuring the reliability and durability of your electrical connections over time.