APC AP8704S-WW 1.2m
$60.99
Description
Power Cable, No, IEC C13, IEC C14, Black
APC AP8704S-WW 1.2m properties
| Product name | AP8704S-WW 1.2m |
| Type | Power Cable |
| Grounded | No |
| Cable Length | 1.2 m |
| Contact for Power Source | IEC C14 |
| Connector | IEC C13 |
| Maximum Power (without spikes) | 10.0 A |
| Colour | Black |
| Depth | 4.5 cm |
| Weight | 1010.0 g |
Frequently Asked Questions:
What is the recommended cable length when using the APC AP8704S-WW 1.2m surge protector with inline RCD?
When utilizing the APC AP8704S-WW 1. RCD, it is suggested to use a cable length that is compatible with the specific application and environment. However, for general guidance, it is recommended to keep the total length of the power cords connected to the surge protector below 5 meters (approximately 16 feet) to minimize voltage drop and ensure optimal performance.
How do I properly configure and program the APC AP8704S-WW 1.2m using the web interface or serial connection?
Configuring and programming the APC AP8704S-WW 1. Here are the steps for both methods:
Web Interface Configuration:
1. Connect your computer to the network switch connected to the AP8704S-WW via Ethernet cable. Open a web browser and type "http://apc. Content. ID=269" into the address bar. This will take you to the AP8704S-WW documentation page. Click on the "Downloads" tab to access the software and user manuals for the device. Download the latest firmware for your specific model and save it to a convenient location on your computer. Connect to the AP8704S-WW web interface by opening a new browser window and typing "http://192. If prompted, enter the default username (admin) and password (password). Once logged in, click on the "System Tools" tab and select "Firmware Upgrade". Browse to the location where you saved the firmware file and upload it to the device. Follow the prompts to complete the upgrade process. After the upgrade completes successfully, log out of the web interface and then back in again. This will ensure that you are using the latest version of the software. Navigate to the "System Configuration" tab and make any necessary configuration changes. This includes setting up SNMP, configuring NTP, and modifying network settings. Save your changes and exit the web interface. Serial Connection Configuration:
1. Connect a computer running Windows or Linux to the serial port on the AP8704S-WW using an RS-232 cable. The default baud rate is 19200, 8 data bits, no parity, and 1 stop bit. Open a terminal emulator program such as PuTTY or minicom. Connect to the serial port at the specified settings. Log in to the device using the default username (admin) and password (password). To upgrade firmware, enter the following command: "fwupgrade file_name. Replace "file_name. Follow the prompts to complete the upgrade process. After the upgrade completes successfully, log out and then back in again. Enter the following command to configure SNMP: "snmpcommunity community_string". Replace "community_string" with a unique string for your network. Enter the following command to set up NTP: "ntpserver server_name". Replace "server_name" with the IP address or hostname of an NTP server on your network. Enter the following command to modify network settings: "ipaddress ip_address", "subnetmask net_mask", "gateway gw_ip", and "dnsserver dns_server". Replace each parameter with the appropriate value for your network configuration. Save your changes and exit the terminal emulator program. Regardless of which method you choose, always test the device thoroughly after making any configuration or programming changes to ensure that everything is working as expected.
How do I properly install and configure the APC AP8704S-WW 1.2m surge protector for my home office setup?
Here's a step-by-step guide on how to properly install and configure the APC AP8704S-WW 1. Step 1: Gather Necessary Tools and Equipment
Before starting the installation process, make sure you have the following tools and equipment:
- Screwdriver
- Wire stripper/cutter (if needed)
- APC AP8704S-WW surge protector
- Ethernet cables for internet and network connections
- Phone line cable for phone connection
- Power strips and extension cords (optional)
Step 2: Choose the Right Location
Select a location near your work area that's easily accessible and has enough space to accommodate the surge protector. Make sure it's positioned in a way that won't obstruct doorways, walkways or cause any tripping hazards. It should also be placed away from water sources and areas with high humidity levels. Step 3: Mount the Surge Protector
If you prefer to mount the surge protector on a wall instead of placing it on a flat surface, follow these steps:
- Locate the two mounting brackets included in the package. Use a screwdriver to attach one bracket to each side of the surge protector. Find a suitable location for mounting and use a pencil or marker to mark where you'd like to drill the holes. Drill the holes using a power drill or manual drill, depending on your preference. Insert the screws into the pre-drilled holes and attach the surge protector to the wall. Step 4: Connect Your Devices
Follow these steps to connect your devices to the surge protector:
- Plug in your computer or laptop using the AC outlet on the surge protector. Connect your router, modem, and any other networking devices using the Ethernet ports provided by the surge protector. Use the phone line jack to connect your telephone line to the surge protector's phone port. Plug in any other peripherals that require power such as printers, scanners, or speakers using the additional outlets available on the surge protector. Step 5: Configure Your Network Settings
Once you have connected all your devices, follow these steps to configure your network settings:
- Connect your computer or laptop to your router's wireless network using a web browser. Enter the router's IP address into your web browser's address bar (usually printed on the router's label) and press enter. Log in to your router's configuration page using your administrator username and password. Configure your network settings such as SSID, security type, and password to suit your needs. Step 6: Test Your Setup
After completing the installation process, it's essential to test your setup to ensure everything is working correctly. Follow these steps:
- Power on all connected devices. Verify that you have internet connectivity and that all networked devices are able to communicate with one another. Make a few calls using your telephone line to confirm that the surge protector's phone jack is functioning correctly. By following these steps, you should be able to install and configure your APC AP8704S-WW 1. Remember to always handle electrical equipment with care and respect to prevent any potential hazards.
Gracie Norton –
Hello, my name is Gracie Norton and I am delighted to share my experience with the latest addition to my household – an electrical accessory that has taken my home’s functionality to new heights. A few months back, while browsing through this online store, I stumbled upon a product that immediately caught my eye. It was the AP8704S-WW 1.2m, and after extensive research and consultation with experts in the field, I decided to take the plunge and make it mine.
I must say, it has been a game-changer for me, especially in terms of convenience and efficiency. As someone who enjoys preparing baked eggs and potato hash on weekends, having this accessory in my kitchen has made the process so much easier and less time-consuming. I no longer have to fuss over setting up the equipment or worrying about any technical glitches that might arise during cooking. The AP8704S-WW 1.2m ensures smooth and uninterrupted performance, which is a significant advantage for an amateur like me.
However, my experience with this electrical accessory goes beyond just its functionalities. I once had an interesting encounter with a waitress at a local diner who was using a similar product to prepare my order. She explained how it made her job easier and helped her cater to multiple customers simultaneously without any delays or errors in the food’s quality. It made me appreciate the professional use of this accessory all the more, and I couldn’t help but marvel at its versatility and reliability.
In my opinion, the AP8704S-WW 1.2m strikes a perfect balance between amateur and professional usage, making it an ideal choice for individuals who enjoy cooking as a hobby or for those who run small restaurants or cafes. Its user-friendly interface ensures that even beginners can operate it with ease, while its advanced features cater to the needs of seasoned chefs and food industry professionals. It is truly a versatile product that has earned a prominent place in my kitchen and has become an indispensable part of my cooking routine.
In conclusion, I would like to express my gratitude towards this online store for providing me with such a superior-quality electrical accessory. The AP8704S-WW 1.2m has exceeded all my expectations, and I am thrilled to have made this purchase. It has brought a new level of convenience and efficiency to my everyday life and has allowed me to explore the world of cooking in ways that were previously impossible for me. Thank you!